A promising government contract can be hard to pursue if you can’t show how you charged labor and other costs. DCAA compliance starts with dependable records and contract-specific obligations, not universal agency approval.
For a growing business, the challenge is connecting everyday bookkeeping with contract-level accountability. Identify your obligations, then keep records that show where each charge came from.
Key Takeaways
- DCAA compliance depends on the requirements in each solicitation, contract, and applicable clause; no universal approval rule or automatic small-business exemption exists.
- Keep contract costs traceable from source documents through timekeeping, payroll, labor distribution, indirect-cost allocation, and the general ledger.
- Prepare for the specific review: a preaward survey evaluates a proposed system, while a postaward review examines how the system operates and supports reported costs.
- Audit findings do not automatically impose penalties or payment withholding. Follow the contracting officer’s notice, applicable contract terms, and required corrective-action deadlines.
DCAA compliance: what it means and when it applies
Quick answer: DCAA compliance means maintaining accounting records and practices that meet applicable government contract requirements and support audit review. The Defense Contract Audit Agency reviews contractor accounting and contract costs for government agencies. Your obligations depend on the solicitation, contract, and applicable clauses. Federal contractors don’t all face identical accounting system rules, and small businesses aren’t automatically exempt when relevant requirements apply.
What does DCAA audit?
DCAA conducts contract audits and provides findings to government contracting officials. Its contract audit services may cover proposed contract costs and rates, including a forward pricing audit. Reviews may also address incurred costs and contractor systems.
For cost-reimbursable contracts, incurred-cost review can make accurate tracking especially important. An incurred cost audit examines reported costs, while an incurred cost submission is the contractor’s report for review.
An accounting system review examines whether records support reliable contract costing. That can include timekeeping, labor distribution, indirect-cost allocation, and reconciliation with the general ledger.
However, the audit’s scope matters. Reviewing one proposal, such as a forward pricing audit, doesn’t mean every part of your records meets every future contract requirement. Understand what the government is reviewing before describing an audit result to prospective buyers.
Do small businesses need to comply?
Small-business status doesn’t cancel accounting requirements that apply to a solicitation or contract. Review the actual clause list rather than assuming revenue or employee count creates an exemption.
Federal Filing’s FAR and DFARS compliance guide provides broader context for identifying contract obligations.
Separate registration requirements from accounting requirements during that review. An accurate business registration identifies your company for federal business, but it doesn’t demonstrate that your labor charges or indirect-cost calculations are supportable.
Build an accounting system that supports contract costs
Your accounting system should let a reviewer trace costs from source documents through the ledger to each contract or cost objective. A cost objective is the contract, task, or other activity you accumulate costs against.
Job cost accounting helps make that path clear.
Separate costs and reconcile the records
When included in a DoD contract, 252.242-7006 establishes specific accounting-system criteria. The applicable criteria include:
- Separating direct costs from indirect costs.
- Identifying direct costs by contract and consistently allocating indirect costs.
- Reconciling subsidiary ledgers with the general ledger.
These internal controls help keep job cost accounting connected to the company’s books, rather than isolated in a spreadsheet.
For preparation, select a recorded charge and follow its documentation through the system. The amount, accounting period, and assigned contract should agree. If someone must manually reconstruct the connection, improve the process before an auditor requests it.
Address the less visible requirements
The DFARS contract administration requirements provide the framework for accounting-system oversight. Under the applicable clause, criteria also include interim cost determinations at least monthly and exclusion of unallowable costs.
An expense can belong in your business records without qualifying as allowable costs for government reimbursement. Recorded expenses aren’t automatically chargeable to the government, so keep unallowable costs visible rather than deleting them or hiding them in another account.
Provisional billing rates are estimates and need supporting records; they’re distinct from final cost determinations. Cost Accounting Standards may also apply, depending on the contract.
Additional criteria address contract-line-item and unit-level cost identification when required, plus separation of preproduction and production costs when applicable. Build these reporting details into your setup early because adding them after costs accumulate can require substantial cleanup.
Software such as Deltek Costpoint can support recordkeeping, but the tool alone doesn’t establish compliance. Use the accounting system to maintain traceable records and consistent reporting.
Make labor charges traceable through payroll
Labor charging must connect employee time to the right cost objective, then link those hours to labor costs. Accurate payroll totals alone don’t show that each contract received the correct charges.
DFARS 252.242-7006 addresses timekeeping and labor distribution. Timekeeping identifies labor by cost objective, while labor distribution assigns related costs to the appropriate accounts.
Document how employees use the timekeeping system to record hours and correct mistakes. Explain how workers select charge codes and follow labor charging procedures. Identify who reviews and approves entries, and how internal controls preserve each correction’s history.
A useful internal test traces recorded hours through payroll, labor distribution, and the contract-cost report. Reconcile those records with the accounting system and job cost accounting records, then investigate differences before using figures for billing.
A floor check verifies an employee’s work and timekeeping against assigned duties. Compare observed work and charge codes with the employee’s time records and assignment. Auditors may conduct a floor check, but not for every contract.
Don’t leave training entirely to the accounting team. Employees need clear instructions for recording their work, while supervisors need to understand their review responsibilities.
Because contracts and assignments change, review charge codes when new work begins. An outdated code can undermine otherwise accurate time records.
Accounting software such as Deltek Costpoint can support this process, but a purchase alone won’t establish that it works. Configuration, employee practices, and reconciliations must support the records the system produces.
Use a DCAA compliance checklist to prepare for an audit
Audit readiness starts with evidence that matches the review’s purpose. First, confirm whether the government is evaluating your proposed system’s design or examining how it operates after award.
Prepare for a preaward accounting-system review
A pre-award survey examines whether the proposed accounting system meets applicable criteria. DCAA’s preaward accounting-system guidance explains this review and its connection to SF 1408, the Preaward Survey of Prospective Contractor Accounting System.
Prepare the accounting system’s structure, written procedures, and explanations of how it will accumulate contract costs. Be ready to demonstrate the proposed workflow.
If proposed costs are in scope, organize estimates and assumptions for a forward pricing audit. Keep relevant cost data and rate support available for a forward pricing audit, including the basis for contract pricing.
The government needs more than a statement that your software supports job costing. Show how your planned setup addresses the criteria under review.
Prepare for a postaward review
A postaward review examines how the system works in practice against applicable requirements. Use this checklist to organize supporting evidence:
- Match the review scope to the solicitation, contract, and applicable accounting-system criteria.
- Gather source documents for the incurred cost submission and trace selected charges into contract-cost reports and the general ledger.
- Reconcile timekeeping, payroll, and labor-distribution records, then compare costs before finalizing the incurred cost submission.
- Document indirect-cost allocation methods, the treatment of unallowable costs, and support for provisional billing rates.
- Check that the incurred cost submission and supporting records cover the requested period. Assemble monthly cost records, written procedures, and evidence of management review.
Assign a contact who understands the records and can coordinate responses. Before providing documents, check that reports cover the requested periods and that different versions don’t conflict.
Understand audit findings and keep compliance on track
Audit findings can trigger corrective-action requests and affect contract administration. DCAA compliance findings don’t carry a universal automatic penalty; consequences depend on contract terms and contracting-officer decisions.
DCAA reports its findings, but the contracting officer makes specified acceptability determinations for the accounting system. Keep that distinction clear when discussing audit results internally.
If a solicitation or contract requires an acceptable system, unresolved problems may affect awards, payments, or other administration actions. Adjustments to provisional billing rates may also follow, but only as contract terms and determinations allow.
A proposal-related forward pricing audit finding has a different scope from a postaward finding.
Under DFARS 252.242-7006, a contractor has 45 days after the contracting officer’s final determination to correct identified material weaknesses or submit an acceptable corrective-action plan. Follow the notice and confirm which deadline applies.
Payment withholding is conditional. If the contracting officer finally disapproves the system and the contract includes clause 252.242-7005, withholding follows the cited clause. An audit finding alone doesn’t trigger withholding.
A useful corrective-action plan identifies the problem, assigns responsibility, and explains how internal controls will verify the fix. Keep evidence that the revised process works.
For example, questioned costs in an incurred cost submission may require supporting records or correction. If follow-up requires a revised incurred cost submission, document how differences were resolved.
An audit finding alone doesn’t automatically impose civil and criminal penalties; intentional fraud or false claims may create separate legal exposure. Ask your contracting officer to clarify the expected response when a finding or notice is unclear.
Keep audit readiness part of normal operations
Audit readiness is easier to maintain when accounting controls operate throughout contract performance. Periodic cleanup can’t replace records employees create and review during normal work.
Use the monthly cost-determination requirement, when applicable, as a checkpoint for reviewing contract reports. Confirm that:
- Labor distribution agrees with payroll.
- Subsidiary records reconcile with the general ledger.
- Job cost accounting follows your documented practices.
- Indirect costs follow your documented allocation method, and support for provisional billing rates is up to date.
Assign ownership for these checks. In a smaller company, one person may handle several duties, but procedures should still identify who prepares and reviews records.
Keep your accounting procedures current when you change software, payroll providers, or allocation practices. Reassess provisional billing rates when assumptions or contract circumstances change. Train affected employees before they begin using a revised process.
Contract modifications deserve attention too. Review them for changes that affect cost tracking, reporting, or billing, and update your accounting instructions as needed. Maintain records for any required incurred cost submission and track its applicable deadline.
Because Federal Acquisition Regulation citations may change as agencies implement the FAR overhaul, check current FAR deviation guidance before relying on a citation. Confirm the relevant agency’s current class deviations and the actual solicitation or contract language. FAR Part 31 addresses cost allowability, while Cost Accounting Standards apply only when contract coverage requires them.
These habits help prevent a gap between the procedures you describe and the records your business produces.
Frequently Asked Questions
What does DCAA compliance mean?
It means maintaining accounting records and practices that meet applicable government contract requirements and support audit review. The requirements depend on the solicitation, contract, and relevant clauses.
Do small businesses need to meet DCAA requirements?
Small businesses are not automatically exempt when accounting requirements apply to their contract. Review the actual solicitation and contract clauses to identify your obligations.
Does using accounting software make a company DCAA compliant?
No. Software can support recordkeeping, but configuration, employee practices, written procedures, and reconciliations must produce reliable, traceable records. The system must also meet the criteria that apply to the contract.
What happens if DCAA identifies a problem?
DCAA reports findings, while the contracting officer makes specified accounting-system acceptability determinations. The consequences depend on the contract and the contracting officer’s decision; follow the notice and applicable deadlines to correct weaknesses or submit a corrective-action plan.
Protect contract performance with dependable records
Reliable records, clear procedures, and early preparation support audit readiness and help reduce avoidable DCAA compliance problems. Focus on traceable contract costs and the requirements that apply to your work.
Review the clauses in each active solicitation or contract, then confirm that your business registration details remain current. Federal Filing offers SAM.gov registration and renewal support, including guidance on keeping your registration active.
That support addresses a separate eligibility step. It doesn’t replace accounting advice or guarantee DCAA approval; your accounting practices must meet the contract requirements.















